CAB202013XE

Li-Ion battery
Light, compact, longer duration, no memory effect.

Samsung SDI battery
Samsung batteries for power bank has achieved world’s longest battery life cycle. They minimize capacity loss that may occur during long-term usage and thereby maximizes the user’s convenience.

Keyless chuck
Enables fast manual changing of accessories without any special key.

Variable torque
Torque regulator enables adjustment of contact pressure and torque force.

V-groove
Allows chamfering at the edges of treated workpieces.

2 function modes (drilling / impact drilling)
Enables changing between 2 operation modes: drilling (in wood, metal, plastic) and impact drilling (in concrete, bricks, masonry).

2 function modes (screwdriving / drilling)
Enables changing between 2 operation modes: screwdriving (screwing / unscrewing threaded fasteners) or drilling (in wood, metal, plastic).

3 function modes (drilling / impact drilling / chiselling)
Enables changing between 3 operation modes: drilling (in wood, metal, plastic), impact drilling (in concrete, bricks, masonry) and chiselling (plaster and ceramic coatings revoval or chiselling of cable ducts).

4-stage pendulum
Enables the changing of pendular motion between 4 stages.

Angular adjustment
Provides a precise and angle-accurate sawing of all required cuts.

Anti-vibrations system
Allows to reduce the fatigue during extended period of work.

Planing depth regulator
Constantly adjustable and suitable as additional handle for safer positioning.

Cutting depth adjustment
Allows half-cuts in order to obtain clean cuts and sharp edges during a second try.

Dust extraction system
Allows to collect dust in designated dust bag or to connect vacuum cleaner.

Electronic speed adjustment
Speed is controlled from 0 to maximum by pressing force of on/off switch. Light pressure results in low revolutions, which enable a smooth power tool switch-on.

Extra gear rim chuck with SDS PLUS adapter
Allows the use of drill bits with cilindric shank in rotary hammers with SDS PLUS chuck.

Gear rim chuck
Ensures safe fastening of accessories.

Integrated LED light
Located on the housing, it offers the user an always well lit workspace.

Keyless chuck with locking function
Enables fast manual changing of accessories without any special key. Equipped with locking function ensures reliable fixation of accessories.

Lock-off function
Fix OFF position of on/off switch to prevent an accidental switching on of the power tool.

Lock-on function
Fix ON position of on/off switch to ensure comfort during extended work mode.

M10 spindle thread
Suitable for accessories featuring M10 mounting bore.

M14 spindle thread
Suitable for accessories featuring M14 mounting bore.

Metal keyless chuck
Enables fast manual changing of accessories without special key.

Reverse function
It allows to change rotational direction.

Quick charger
Allows full battery charging in only 1 hour time.

Safety clutch
Protects the power tool against overload and damage in case of accessories sticking during drilling.

Safety stop
Avoids demages of the treated surface and of the blades of the planer while the power tools is temporarily put aside after completion of the operation.

SDS-Plus chuck
Suitable for accessories featuring equivalent shank. It allows fast manual fastening.

Soft grip
Located on the handle, it offers additional comfort for the users.

Soft start
Provides a slow and even start-up without overloading the power grid.

Spindle automatic locking
Drill spindle is locked when the on/off switch is not pressed, enabling to use the tool as a screwdriver.

Spindle lock
Blocks the spindle in its rotating movement so that the circular saw blade may be inserted or removed easily.

Spindle lock
Blocks the spindle in its rotating movement so that the accessories may be inserted or removed easily.

Step speed selection
Allows to select the range of revolutions per minute for specific types of work.

Vario-lock mode
Allows to arrange the chisel in a comfortable position for specific chiseling works.

Variable speed
Allows to select optimal speed for specific materials.

Two-position on / off switch
Secured both in "on" position and in "off" position.

Restart protection
Prevents the power tool from automatically starting up after a power cut.

Saw blade easy change
Enables fast manual changing of saw blade without any special key.

Resharpenable blades
Use the specific device provided in order to resharpen blades when blunted.

Interchangeable blades
Blades sharpened on both sides; this design does not allow re-sharpening.

Impact drilling function
For impact drilling in hard materials ( such as concrete, bricks, masonry).

Screwdriving mode
For screwing / unscrewing threaded fasteners (such as bolts, nuts, screws, self-tapping screws).

1/2" square tool holder
Suitable for accessories provided with appropriate mounting hole (1/2" square). Enables quick accessories changes.

1/4" hexagonal tool holder
Suitable for accessories provided with appropriate shank (1/4" hexagonal). Enables quick accessories changes.

2 function modes (blower / vacuum cleaner)
Allows to convert the blower into a vacuum cleaner in order to collect debris.

2 function modes (impact drilling / chiselling)
Enables changing between 2 operation modes: impact drilling (in concrete, bricks, masonry) and chiselling (plaster and ceramic coatings revoval or chiselling of cable ducts).

2-step regulator
Allows to change the settings of work-temperature and air flow.

2 function modes (stirring / drilling)
Enables changing between 2 operation modes: stirring (miхing different building materials) or drilling (in wood, metal, plastic).

3-step regulator
Allows to change the settings of work-temperature and air flow.

3 function modes (screwdriving / drilling / impact drilling)
Enables changing between 3 operation modes: screwdriving (screwing / unscrewing threaded fasteners), drilling (in wood, metal, plastic) or impact drilling (in concrete, bricks, masonry).

3 V-grooves
Allows chamfering at the edges of treated workpieces.

30L capacity
The vacuum cleaner container provides 30 liter capacity.

60L capacity
The vacuum cleaner container provides 60 liter capacity.

80L capacity
The vacuum cleaner container provides 80 liter capacity.

100L capacity
The vacuum cleaner container provides 100 liter capacity.

Adjustable nozzle
Allows to choose between 3 different spray jet shapes.

Adjustable spark protector
Protects user from sparks and metal filings during the grinding process. It may be adjusted to the most suitable angle for work.

Adjustable work piece support
Allows safe placement of workpiece on the grinding disc, that permits to maintain the desired sharpening angle.

Air flow adjustment
Allows to adjust optimal air flow for specific works.

Anti-vibrations handle
Allows to reduce the fatigue during extended period of work.

Automatic circuit breaker
Prevents unintentional switching on in case of current supply interruption. It increases safety of the operation.

Both-sided table extensions
Allows to cut bigger workpieces.

Carriage positionAllows to lower and lock the carrying grip for easy transportation and space-saving storage.

Clamping device
Allows to secure the workpiece during operation.

Sanding paper clamping system
Features clamp lever for easy and convenient replacement of sanding papers.

Rotation speed stabilization system
Maintains the preset revolutions per minute both at an idle speed and under load. This allows a smooth advance of the power tool during operation.

Cool stage
Cold air mode allows to cool off workpieces and surfaces after heat treatment.

Cutting depth adjustment
Allows half-cuts in order to obtain clean cuts and sharp edges during a second try.

Rear D-handle
Allows safe handling.

DC motor
Mechanically commutated electric motor powered by direct current.

Wet / dry cutting
Allows dry cutting and wet cutting thanks to the integrated water cooling system.

Dry/wet function
Allows water absorption, oil absorption, acid suction and dust absorption.

Dry cutting
Cutting without water cooling system.

Dust blowing from the cutting line
Allows to re-direct the sawdust air flow.

Full blade safety guard
Secures cutting disc from along diameter.

Hanging system
Allows to hang power tool during the utilization.

HEX-13 tool holder
Suitable for accessories featuring equivalent shank. It allows fast manual fastening.

HEX-17 tool holder
Suitable for accessories featuring equivalent shank. It allows fast manual fastening.

HEX-28 tool holder
Suitable for accessories featuring equivalent shank. It allows fast manual fastening.

HEX-30 tool holder
Suitable for accessories provided with corresponding shank which allows fast manual fastening.

Impact rate regulation
Makes it possible to set up optimal quantity of impact for the respective materials.

Impact strength regulation
Allows to select optimal strength of impact for specific materials.

Kerf laser indicator
Shows the cutting line.

LED-screen
Shows the selected number of revolutions.

LED-screen
Shows the selected temperature.

Lock-off / Lock-on function
Fix OFF position of on/off switch to prevent an accidental switching or fix ON position of on/off switch to ensure comfort during extended work mode.

M10 tool holder thread
Suitable for accessories featuring M10 shank.

M14 tool holder thread
Suitable for accessories featuring M14 shank.

M22 spindle thread
Suitable for accessories featuring M22 mounting bore.

M22 tool holder thread
Suitable for accessories featuring M22 shank.

Choosing the chips ejection direction
Allows to install reflector for chips ejection in two opposite directions.

Plunge depth control system
Allows the user to select the desired milling depth.

Mitre angular adjustment
Provides a precise and angle-accurate sawing of all required cuts.

Ni-Cd battery
Provides good performance at low temperatures.

Overload protection
Automatically switches off the power tool in case of overheating.

Power light indicator
On when the power tool is connected to the mains and ready to be switched on.

Rotating rear handle
Rear handle can be rotated into different positions.

Rotation stabilizer
Maintains set rotation rate irrespective of applying pressure on the surface during polishing.

Tool holder
Allows to install accessories with appropriate shank.

Scale of milling depth
Shows the selected depth of milling.

SDS-Max chuck
Suitable for accessories featuring equivalent shank. It allows fast manual fastening.

SDS-Plus square chuck
Suitable for accessories featuring equivalent shank. It allows fast manual fastening.

Sliding working table
Intended to supply workpieces when performing cross and angular cutting.

Spindle lock
Blocks the spindle in its rotating movement so that the grinding accessories may be inserted or removed easily.

Spindle lock
Blocks the spindle in its rotating movement so that the diamond cutting blade may be inserted or removed easily.

Spindle lock
Blocks the spindle in its rotating movement so that the router bits may be inserted or removed easily.

Stroke rate regulation
Allows to adjust optimal stroke rate for specific materials.

Speed adjustment
Allows to change revolutions per minute.

Table for stationary use
Allows the use of power tool in stationary mode.

Temperature protection
Automatically switches off the power tool in case of overheating.

Temperature setting
Allows to adjust optimal temperature for specific types of work.

Variable paint flow
Allows to set the intensity of the paint application ensuring perfect coverage.

Variable speed
Allows to select optimal belt speed for specific types of work.

Velcro and clamping fixing system
Allows the use of abrasives with both type of fixing system: clamping or velcro.

Velcro fixing system
Allows quick, easy and safe fixation of abrasives.

Water resistant on/off switch
Switch is protected against water splashing.

Wet cutting
Allowed thanks to the integrated water cooling system.

Wet grinding
Allows thanks to the integrated water cooling system.

Wet operation
Allowed thanks to the integrated water cooling system.

Carbon brush replacement indicator light
Warns regarding the need to replace carbon brushes.

Fuel tank capacity
The maximum capacity of fuel tank is 0,55 L.

Fuel tank capacity
The maximum capacity of fuel tank is 0,6 L.

Fuel tank capacity
The maximum capacity of fuel tank is 1,1 L.

3/8" square tool holder
Suitable for accessories provided with appropriate mounting hole (3/8" square). Enables quick accessories changes.

3/4" square tool holder
Suitable for accessories provided with appropriate mounting hole (3/4" square). Enables quick accessories changes.

1" square tool holder
Suitable for accessories provided with appropriate mounting hole (1" square). Enables quick accessories changes.

2 lines projection mode
Allows to project one horizontal line and / or one vertical line.

3 lines projection mode
Allows to project one horizontal line and / or two vertical lines.

5 lines projection mode
Allows to project one horizontal line and / or four vertical lines.

Laser class 2
The laser beam meets the safety requirements of the class 2

Automatic self-levelling
The tool is equipped with a self-levelling system

High class OSRAM Diode
OSRAM is the market leader for the production of laser diodes. Its name is a guarantee of advanced technologies and superior quality

Belt clip
The tool is provided with hook for easy carrying.

LCD display
Displays the object and values of measurements made.

Reference point
Allows choosing the reference point.

Possibility of steady-state use
The power tool design allows steady-state operation.

Possibility of steady-state use
The power tool design allows steady-state operation.

Type of measure
Allows choosing the type of measurements.

Calculating
Allows carrying out mathematical operations awith measured values.

Units selection
Allows choosing units of measurement

Units selection
Allows choosing units of measurement

Memory
Allows saving measurements made.

Battery locking system
Locking bracket provides secure attachment battery, and prevents it disconnection even by work with strong vibrations.

Brushless motor
Brushless motor without carbon brush for smooth and efficient work and maintenance-free.

Built-in level
Designed for correct positioning of the appliance.

LCD screen
Displays values of measurements made.

Backlight
Allows enabling the backlight.

Zoom
x6 zoom

Operation mode
Allows choosing the mode of operation

Arc force
The arc force function allows the sticking of the electrode to a piece to be welded to be prevented.

Easy start
The easy start function (increased voltage of idle running) facilitates the lighting up of the welding arc.

Voltage reduction device VRD
The function of voltage reduction of idle running increases the safety of the welding works performance.

Input power
Allow use one or three phase input power.

Multi-process machines
The welding machine can perform both TIG or MMA process

TIG welding technology
Gas tungsten arc welding / Tungsten inert gas welding.

Welding torch operating mode 2T / 4T
2T mode is recommended for short -term welding. 4T mode is recommended for continued welding.

Inductance regulation
It allows to adjust the arc softness and stiffness. For deep weld penetration, the arc is made stiffer; however, spattering is increased in this case. The soft arc is used to weld root welds and to lift vertical welds.

Voltage meter
It shows the selected voltage.

Voltage regulation
It allows you to set the voltage value.

External wire feeder
External welding wire feeding unit.

CUT technology
Plasma cutting.

Welding current meter
Shows the selected welding current.

Internal wire feeder
Welding machine has Internal welding wire feeding.

Gradual decrease of welding current
Using special regulator time of welding current decrease can be set. Gradual decrease of welding current allows high-quality crater filling in the end of welded seam.

High-frequency arc starting
Welding arc is started without contact between tungsten electrode and welding surface using a flash generated by high-frequency device.

MOSFET technology
Metal-oxide-semiconductor field-effect transistor.

Multi-process machines.
The welding machine can perform both MIG or MMA process

Air cooling
The ventilation system protects internal components from overheating and increases efficiency

Hot start function
The hot start function increases the set welding current for a short time at the moment of the welding arc lighting. It facilitates the lighting up of the welding arc.

Current control
Allows the intensity of the current to be changed, depending on the thickness of the metal being cut.

3-Phases
Three phase input power.

1-Phase
Single phase input power.

IGBT technology
Insulated-gate bipolar transistor.

MMA welding technology
Shielded metal arc welding / Manual metal arc welding.

Pressure protection
The system prevent the pressure overload.

Detergent tank
The machine is provided with separate tank for the use of cleaning products

Hose reel
Allows you to safely and compactly store a high-pressure hose.

Adjusting detergent quantity
Allows setting the quantity of detergent added to the water.

Self priming
The automatic system allows to start the tool quickly even after long inactivity.

Variable pressure
Allows to select optimal pressure for specific uses.

Adjustable stream
Enables fast manual adjustment of water stream.

Easy fill
Allows filling the reservoir without dismount it.

Safety cleaning
Prevent electric shock when cleaning the power tools.

Built-in station
Allows you to safely store, transport the sprayer.

Metal tank
Made of robust stainless steel, reliable and easy to clean.

Suction power 2-step adjustment
The suction power can be set in two positions to achieve the best efficiency in all the situations

Suction power 3-step adjustment
The suction power can be set in three positions to achieve the best efficiency in all the situations

Triple outlet air cleaning system
The system allows for effective removal of fine dust (plaster, soot, etc.).

Air blowing mode
This function allows for cleaning by blowing off waste with airflow in places where it is complicated or impossible to suck in waste (air purging of complex office machines, blowing leaves off gravel path, etc.).

Suction power adjustment
This function may be useful when cleaning dirt from light movable objects (carpets, floor mats, etc.).

Possibility to connect other power tools
When in this mode, the vacuum cleaner switches on automatically if the connected power tool is switched on.

HEPA-filter cleaning
Allows clean the HEPA filter without removing it from the vacuum cleaner.

Precise rotation
Allows accurately set the position of the tool's body when measuring.

Protection class IP54
Allows limited use of the appliance outdoors (in places protected from direct exposure to jets of water and dust streams), as well as in a room with high humidity.

Magnification x32
Allows magnify the image of the object.

Manometer
The tool is provided with manometer for a precise regulation of the pressure.

Quick-change attachments
Enlarge the area of power tool usage and allow to perform works in hard-to-reach places.

Spindle automatic locking
Tool spindle is locked when the on/off switch is not pressed, enabling to use the tool as a screwdriver.

Carriage position
Allows to lower and lock the carrying grip for easy transportation and space-saving storage.

Outdoor mode
Allows to make measurements in conditions of strong illumination.

Unlevelled signal
It signals the impossibility of automatic alignment of the laser head.

Laser head locking
Allows to lock the laser head in a stationary position.

Integrated tripod
The tripod is included in the delivery set.

Precise rotation
Allows you to position the vertical beam with high accuracy.

Aluminium frame
The structure of the tool is made by light and strong aluminium material

Safety lock
Fixes the body of the power tool in the upper position and locks the on / off switch, protecting against accidental switching on.

Rebating
It allows planing a rabbet in the workpiece.

Level sensor
Shows tilt angle of the body of the power tool.

Spirit level
Shows the position of the power tool case in the horizontal plane.

Ergonomic handle
It facilitates curved cuts.

Gas purge
Improves quality of welded seam.

Quick coupling
Air inlet 1/4".

Quick coupling
Air inlet 1/2".

Quick coupling
Air inlet 3/8".

Transition sleeve
Adapter sleeves for rivets of three different diameters.

Types of rivets
Allows the use of rivets made of aluminum, copper and stainless steel.

Auto suction
Allows you to hold the rivet in any position.

Hanging system
Allows you to hang the tool.

Rotating pivot
It prevents air hose from tangling.

Easy detach
Allows you to quickly connect / disconnect the tool to the air line.

Two in one
Allows to use both staples and nails.

Change of air discharge direction
The air exhaust can be rotated in your favourite direction, for a more confortable work

Units selection
Allows choosing units of measurement.

Square base
Wide square base with wheels

Universal 360° wheels
Increase mobility and facilitate appliance movement.

Oil-water separator
It cleans the intake air from oil and water.

Oil tank capacity
The maximum capacity of oil tank is 0,26 L.

Oregon saw chain
Oregon is synonymous of quality and strenghtness.

Auto lubrication
The system allows the chain to be lubricated automatically during the work.

Easy start
The pull resistance is reduced up to 30%.

Brake system
Efficient protection chain brake system for safe and quick chain stop.

Primer pump
The pump allows to start the tool quickly even after long inactivity.

Possibility of steady-state use
The power tool design allows steady-state operation.

Fuel tank capacity
The maximum capacity of fuel tank is 0,9 L.

Multi combi head
Thanks to the use of a wide range of interchangeable cutting tools you will be able to mow grass, weeds, bushes and prune trees and hedges.

12 V
Suitable for 12 V devices

14.4 V
Suitable for 14.4 V devices

16 V Max.
Suitable for 16 V Max devices

18 V
Suitable for 18 V devices.

20 V Max.
Suitable for 20 V Max. devices.

Metal base plate
The power tool has a solid base plate, cast from aluminum.

Break rundown
Stops the spindle of the power tool within 2 seconds after the power tool is turned off

Quick adjustable protective casing
Allows to change the position of the protective casing without using any tools

High-torque indicator
Show when operation with high-torque is activated and need to reduce the feed of the power tool

Overheating and overload protection system
Turns off the motor of the power tool when it overheats, and also if it consumes an excessively high current

Aluminium base plate
The power tool has a solid base plate, cast from aluminum

Spindle lock
Blocks the spindle in its rotating movement so that the accessories may be inserted or removed easily

28 speed stages
The power tool is equipped with an electronic speed control system that allows to select the range of revolutions per minute for specific types of work

Flexible shaft
Allows to transmit torque at arbitrary angles

Special accessories connection
Allows to install accessories in the most convenient position for work

Swivel head of worklight
Can be rotated relative to body

Green laser
Tool has a green laser emitter

Red laser
Tool has a red laser emitter

Silent operation
Thanks to its construction, the generator is featured by a low level of noise

ATS Auto transfer switch
The automatic transfer switch allows to switch on the generator as a backup source in order to provide temporary electrical power if the utility source fails

AC 400V socket
The generator is equipped with 400V 3-phase current output

AC 230V socket
The generator is equipped with 230V 1-phase current output

DC 12V output
The generator is equipped with 12V DC current output

Electric start
The motor engine is equipped with electric start, for comfortable and fast operation

Fuel tank capacity: 14,5 l
The big tank capacity allows the generator to work for long periods without refuelling

Synchronous alternator
The syncronous alternator allows an high efficiency in power generation process

Voltage meter
The voltage meter allows precise control of the output power

Engine protection
The generating set is equipped with low oil warning system．This system will stops the engine automatically when the oil level falls below the lower level. This prevents accidents and damages to the generator

2x AC 230V socket
The generator is equipped with 2 sockets with 230V 1-phase current output

Manual start
Allows to start the generator engine manually, without using a battery.

Low wear out convert system
Ensure longer life time.

Welding machine function
The device can be also used as welding machine.

Smart button
Designed to turn on / off the appliance and has an auto-leveling indicator of laser head.

Swivel head
It allows to work at different angles.

Additional shaft
It allows to extend the tool, for work at bigger height.

Leg protection
It protects feet from injury while working.

Flux core wire
It is possible to use the welding machine in NO GAS mode, with flux core wire.

2 step/4 step welding modes
Welding cycle can be controlled by the switch in 2 step or 4 step mode.

2 step/4 step cutting modes
Cutting cycle can be controlled by the switch in 2 step or 4 step mode.

Analog voltage meter
Shows the working voltage.

Fuel tank capacity: 12,5 l
The big tank capacity allows the generator to work for long periods without refuelling

Fuel tank capacity
The maximum capacity of fuel tank is 15 L.

Operating modes with preset parameters
You can save 4 user operating modes (temperature + air flow).

Oil tank capcity
The maximum capacity of oil tank is 0,6 L.

SHARP Diode
SHARP is one of the market leaders for the production of laser diodes. Its name is a guarantee of advanced technologies and superior quality.

Anti-stick function
When the electrode sticks to the material to be welded,the device automatically turns off the welding generator, protecting the electrode from overheating and shedding of the coating and allowing its manual removal.

Spindle thread 1-1/4"
Allows to install diamond core bits with diameter of seat thread 1-1/4".

Residual current devices (RCD)
Interrupts the power supply when leakage currents are detected, protecting the user from electric shock.

Protection class IP44
Allows limited use of the appliance outdoors (in places protected from direct exposure to jets of water and dust streams), as well as in a room with high humidity.

Copper motor winding
Provides high efficiency, reduces the possibility of overheating, has high durability and better protection against short circuits.

Continuous duty
Appliance can be switched on for a long period of time. It works in automatic mode and does not require any action from the user.

3 planes projection mode
Allows to project one horizontal plane and / or two vertical planes.

1 line + 1 plane projection mode
Allows to project one horizontal plane and / or one vertical line.

AC/DC Voltage
The tool allows voltage reading in AC and DC mode

AC/DC Current
The tool allows ampere reading in AC and DC mode

Resistance
The tool allows resistance measuring

Capacitance
The tool allows capacitance reading

Frequency
The tool allows frequency measurement

Temperature
The tool allows temperature reading

Diode test
The tool allows diode test mode

NCV test
Non contact voltage detection function

DC Current
The tool allows ampere reading in DC mode

Transistor test
The tool is equipped with transistor test mode

Continuity test
The tool allows circuit continuity test

Torch light
The tool is equipped with an useful and versatile LED-light lamp

AC Current
The tool allows ampere reading in DC mode

Max value
Allows recording the max value, for better measuring of fluctuant data

Integrated ruler
The graduated metric scale allows to cut the tiles with precision

Angular guide
The graduated angular guide allows you to make precise angular cuts

Lighter plug
The tool is powered by a 12 V lighter plug.

Battery clamps
The included clamps allow the tool to be powered by direct connection to a 12 V power source, like the battery of your car.

Automatic ON/OFF
The pump is started by an automatic switch that detects water presence.

15L capacity
The vacuum cleaner container provides 15 liter capacity.

20L capacity
The vacuum cleaner container provides 20 liter capacity.

Safety lock
Smart safety lock for avoiding accidental activation and unwanted discharge.

3-step adjustment
The blade opening could be adjusted in 3 positions in order to optimise and speed up the work.

3 L capacity
The vacuum cleaner container provides 3 liter capacity.

Foldable hook
Convenient removable and foldable hook that allows you to hang the tool easily

Burn-free detach mechanism
This function allows you to extract the hot nozzle after use, avoiding accidental burns

Kickback protection
It prevents the tool from suddenly stopping and going out of control during the job

Dry suction
The tool is designed for dry vacuuming

500 ml capacity
The vacuum cleaner container provides 500 ml capacity

Protection IPX8
The engine and the internal components are protected from water with grade IPX8 of International Protection standards.

Floating switch
The pump is started by a floating switch that follows water level.

Remote control
The main functions of the tool could be controlled by the remote controller device, for an easier and faster work.

4 planes projection mode
Allows to project two horizontal plane and / or two vertical planes.

Dual voltage mode
The tool could be set to be used on high or low voltages.

Vibration function
The voltage detector could be set to vibration for better feeling of the signal, for example in noisy environments.

Audible indicator
An audio signal will feed back when voltage is detected.

Magnetic solenoid detector
The tool can test solenoid valves without dismantling.

Color TFT screen
The color TFT screen gives complete information with good confort for your eyes.

Non-magnetic detection
The tool can be set to detect non-magnetic materials under the walls.

Ferrous metals detection
The tool can be set to detect ferrous materials under the walls.

Electric cables detection
The tool can be set to detect current wires under the walls.

Wood detection
The tool can be set to detect wooden materials under the walls.

Compact and portable
The size of the tool, allows you to keep it with you in your pocket.

Temperature and humidity sensor
The tool detects temperature and humidity level, thanks to high-sensitivity sensors.

Energy saving
The tool is equipped with energy saving eco-function for extending battery life.

High sensitivity sensor
The tool is equipped with high quality sensor, with high sensitivity.

Auto range conversion
The tool will automatically switch the sensor range, according to the measured values.

MT2 toolholder
The tool is equipped with Morse taper tool holder MT2.

MT3 toolholder
The tool is equipped with Morse taper tool holder MT3.

Internal gear cooling
The gearbox is equipped with internal liquid cooling system, for long working sessions.

Water shortage protection
In case of water leak or shortage, the pump will stop, in order to avoid any damage.

Auto restart
In case of stop due to a shortage, the system will automatically try to restart regularly, until the water source gets right.

Pressure regulation
Starting pressure is factory set, but it can be adjusted on the head body of controller.

3 mode settings
The operation of the pump could be controlled in 3 working modes: by pressure, by flow, or by time intervals.

IP 65 grade protection
The device is protected against dust and water jets, following IEC standards.

Low pressure eco mode
When you need less pressure and you want to save energy, you can use the eco-mode that limit the pressure and the battery use.

USB-C chargig socket
The standard charging socket allows an easy and fast charging everywhere you go.

Stroke force regulation
For each use, for each material and kind of fastener, you can calibrate the tool's force, in order to get the best results.

Polyester non wowen fabric
It is comprised of 3 layers polyester filament.

Oil free operation
The air compressor does not need oil lubrication. That leads to minor mainteinance costs an easier handling and cleaner air output

Automatic start
The appliance runs together with your power tool, when it is connected to the built-in socket.

Auto filter cleaning
The cleaning cycle of the filter cartridge automatically starts after the appliance is switched off.

Full-Auto filter cleaning
The cleaning cycle of the filter cartridge automatically starts after the appliance is switched off, and during regular operation.

M filtration class
Dust separation performance meets M class specifications.

35 L capacity
The vacuum cleaner container provides 35 liter capacity.

Wet suction
The tool is designed for wet vacuuming.

Protection class IP43
Allows limited use of the appliance outdoors (in places protected from direct exposure to jets of water and dust streams), as well as in a room with high humidity.

Stackable
Thanks to the specially designed shape, each case can be attached to the other through an interlocking system and a locking catch.

ABS
Made of high quality plastic, with very high strenth and durability standards

Guide wheel
When working near a wall or stones, you can easily keep the right distance by using the front guide wheel

Rotatable head
According to the work required or for easier use in different situations, the head can be tilted at will

Adjustable bar
The length of the bar could be asjusted at will

Five cutting heights
The machine can be adjusted to five positions to choose the optimal cutting height for your lawn

Safety cut-out
If the blade is blocked by external agents, the system cuts off the power supply, safeguarding the operator's safety

Swivel head
The light could be directed by rotating the head by 360°.

3-mode setting light
The light could be set in 3 modes: luminous flux 2000 lm, luminous flux 1000 lm, flashing.

Woodworking

Metalworking

Stainless steel processing

Polypropylene
Made of high quality plastic, with very high strenth and durability standards

Protection class IP54
Allows limited use of the appliance outdoors (in places protected from direct exposure to jets of water and dust streams), as well as in a room with high humidity.

Telescopic handel
The length of the handel can be adjusted following needs.